Core definition and structural characteristics

Aluminum honeycomb partition is a composite lightweight partition material with high-strength aluminum alloy panels as the surface layer and hexagonal honeycomb aluminum cores as the sandwich layer. Its structure is similar to the mechanical model of "I-beam": the panels bear in-plane compressive stress, and the honeycomb cores bear transverse shear stress, forming a sandwich structure with high stiffness and low density.

Lightweight: The 15mm thick board weighs only about 5-6kg/㎡, significantly reducing building loads

High strength: compressive strength of 1.5-3.0MPa, capable of bearing over 100kg, suitable for high flow areas

Fireproof performance: Mainstream products reach B1 level flame retardant (such as Peiying and Hengyi), and some high-end models are A2 level flame retardant (such as Dalu Decoration)

Sound insulation and heat insulation: The air honeycomb structure achieves a sound insulation volume of 35-40dB, with a thermal resistance value of about 0.02 ㎡· K/W, effectively blocking cold and hot conduction

Moisture and corrosion resistance: The all metal structure is non absorbent, acid and alkali resistant, and mold resistant, suitable for humid environments such as bathrooms and hospitals

This material is bonded to two-component polyurethane adhesive through hot pressing composite process, ensuring the integration of the core layer and the panel and avoiding the risk of delamination.

Typical application scenarios

Aluminum honeycomb partitions are widely used in high demand public spaces due to their advantages of lightweight, high strength, fire resistance, environmental friendliness, easy cleaning, and customization

|Application scenario | Core requirement matching|

|Public restroom | moisture-proof, antibacterial, impact resistant, easy to clean (such as Hengyi, Kangbeier, Dijia exclusive)|

|Hospital/Laboratory | A2 level fire protection, seamless splicing, inhibition of bacterial growth, in compliance with medical cleanliness standards|

|Airport/high-speed railway station | Large scale flatness (up to 1500 × 5000mm), wind resistance, low maintenance, modern aesthetic performance|

|School/Office Building | Modular installation, shortened construction period, sound insulation and noise reduction, support for customized colors and patterns (wood grain, brushed, solid color)|

|Hotel/Mall | High end visual texture, capable of curved/irregular shapes, integrated with lighting system to enhance spatial grade|

The market size of public bathroom partitions in the Yangtze River Delta region is expected to reach 2.46 billion yuan by 2026, and aluminum honeycomb panels have become the mainstream choice due to the "quality transformation".

Key points of installation and construction

Aluminum honeycomb partitions are often installed using dry hanging or profile buckle installation, with the following key processes:

Keel installation: Use light steel keel or aluminum alloy profile to fix it to the wall/floor according to the design spacing

Fixed suspension components: using expansion screws and main suspension components to ensure load-bearing safety (especially for suspended ceiling applications)

Plate embedding: Insert the plate through sliding fasteners or slots, leaving a thermal expansion and contraction gap (5-8mm)

Edge treatment: Use aluminum alloy edge strips to seal the joints, improving aesthetics and waterproofing

Sealing treatment: Neutral silicone adhesive is used at the joint to avoid water leakage and noise transmission

Installation video can refer to: Detailed installation analysis of aluminum honeycomb hooked ceiling for the entire network, covering the entire process of fixing screws, main keels, and honeycomb panels.

Aluminum honeycomb partitions exhibit excellent flatness and modernity in practical engineering, especially in scenes such as bathrooms, hospitals, and airports.

Display: Real engineering cases such as finished products of anti Beite aluminum honeycomb partitions, real-life bathroom installations, seamless splicing wall panels, and metal honeycomb ceiling effects.

Current market trends and challenges

Trend:

Environmental upgrade: A2 level fire protection and E1 level environmental certification have become hard procurement indicators

Customization: Increased demand for colors (wood grain, gold, black), thicknesses (8-50mm), and shapes (curved, irregular)

Integrated service: The manufacturer provides a full chain solution of "design+production+installation+after-sales"

Challenge:

There are low-priced and inferior products in the market (such as insufficient thickness of core materials and non weather resistant adhesives), which affect long-term stability

The installation technology threshold is high, and non professional construction can easily lead to deformation and cracking

It is recommended to prioritize suppliers with local engineering cases, providing testing reports, and supporting on-site measurements when purchasing, such as local enterprises like Shandong Kangbei and Hengyi, which can reduce logistics and after-sales risks.

The various information published on this website is for reference only and does not represent the position or viewpoint of this website. It does not constitute any investment, medical, legal or decision-making advice. Any actions taken by users based on the information on this website are at their own risk, and this website does not assume any direct or indirect responsibility. This website does not assume any responsibility for the authenticity, accuracy, completeness, or legality of its content.